תצוגת LCD 48v60V72v מד מהירות WT סיבוב אור לאופניים חשמליים קטנוע עשה זאת בעצמך חלקי סקייטבורד טרקטורונים מד תלת אופן

זוהי תצוגת LCD עבור קורקינט חשמלי, אופניים חשמליים, אופני איזון, אופנוע חשמלי, תלת אופן, MTB עם סוללה ומנוע חומצת עופרת, אופנוע דוושה וכן הלאה. מתאים לכל מנוע ללא מברשות כל עוד אתה יכול לתקן אותו על הרכב שלך.

הזמנת כמות קבל מותאם אישית עבור חוטים ואינדיקציה, עבור חתיכה אחת, בבקשה קח את מה שיש לנו.

בדרך כלל עיצוב עבור גרסת חומצה עופרת,
עבור ליתיום, עבור פחות כמות הזמנת, בבקשה קח את מה שיש לנו עבור מתח נמוך ומקסימלי,

1. choose your right one

1.this DISPLAY WE Have many different version, but main function is the same, only slightly different for indication,
this model has a special errow, and is a black shell version compare with that silver one,  we made it phase wire signal for default setting,

big arrow version

this version with bigger arrow
order here
//www.aliexpress.us/item/2251832684051546.html?

the version with more sign

this version has ready sign and low high beam sign
order here
//www.aliexpress.com/item/1005001644192917.html?

2 size

. shell size 15.5*8.5 cm *3 (donot include scew )
display screen 12.2*5.3cm

3.  WIRING

RED-power POSITIVE
green-power negative
blue-frontlight
purple-speed–phase wire voltage signal,
orange -left turning signal
light blue-right turning signal

that two black wire is voltage choosing wire, connected 60v such as, unconnected 48v. customer can have a try,

one single yellow is for hallsensor speed, or one single red is for yxt speed, (this need made to order, default setting no this wire. )
3 wire in another connect —3 speed wire, need made to order -now most board has no 3 wires,

5. screen indicate

battery level,
speed,
voltage in digital,
trip,
frontlight.
ODO.
turning light left and right.
temperature(has temperature wire),tiny black wires are for temperature.
this picture bellow is taken when u connect battery only,

notice :
1). it can only be fully indicated when u first open the battery and error code can only be indicated when controller takes yxt signal,.

usually error code will not be indicated, that need made to order,. need quantity order,

3 gears can be indicated, but need book it, need leave message in remarks in advance,.

2) for speed : point 1: default setting no 3 gears wires
point 2 : default setting this display takes phase voltage wire signal, connect the purple speed wire directly with your motor/controller phase wire, it will read speed,

if especially need hall sensor wire signal please tell us in advance .we need preconnect the wire.

point 3 for speed : attention please :

the max speed is 40-45km/h at max for default setting, but you can adjust it if you need by a potentiometer at back of the display , (you need open this display shell ). or please leave message in advance we will make it for you before sending out.

3. low votlage protection :
for lead acid battery version
for 48v battery as an example, when reach to low voltage 42+/-0.5v, the battery icon will shine , alarm you to charge for battery.

and when reach to top voltage such as 49v, the battery will be full.
usually for 72v, undervoltage proteciton is 62/63v, high is 72v,
for 48v , low voltage protection 41v,
60v , low voltage protection is 52v, high is 60v.
the tolerance is +/-0.5v

for lithium battery version, the battery level icon will be different, the voltage indication by number will be accurate,

the other parts

if need the support and the wind shielding
please order at this link
//www.aliexpress.com/item/4001271890079.html?

, default setting we will not provide this,
since each scooter may need different type

different speed reading way for different controller

THE DISPLAY MATCH WITH DIFFERENT CONTROLLER , PLEASE CHOOSE IT ACCORDING TO speed READING WAYS OF CONTROLLER ,
model 1
common, read phase wire speed, 6 wires in a connector . purple one for speed, connect with controller one single speed reading wire,
recommend controller here
//www.aliexpress.com/item/32950024165.html?
model 2, , phase wire speed, with standby wire for hallsensor speed, but can only choose one.. and has 3 speed wires , sinewave controller usually need hallsensor wire to read speed,

like this type

//www.aliexpress.com/item/32958654008.html?
model 3, phase wire speed, and with yxt wire for speed . can only choose one . votol type controller need yxt wire for speed ,
model 4. communication type, CAN OR BUS,
this need large quantity , need made to order, no stock

Customer loading effect